A pointer is a number that refers to a specific location in a ROM or memory. They may also be referred to as addresses or offsets. The exact way pointers work vary among different systems, and, in fact, some systems have multiple pointer schemes. It has become convention, at least within the PK Hack Community to use the 0x prefix to indicate a pointer referring to the ROM file and to use the $ prefix to indicate a pointer in the format used by the machine. Both prefixes indicate the following number is in Hexadecimal. Different machines may use different byte orders, be careful.
SNES pointers are little endian. Therefore, if you find your pointer comes out to $123456, then your pointer will be written to the ROM as 56 34 12 or, more likely, as 56 34 12 00.
Some information on LoROM would be nice. For now, the information can be found at Zophar's Domain. Perhaps the author of the SNES pointer document there should be contacted about the use of that information.
Take the offset that you wish to point to. Take the last four digits of the offset, and cut off the rest.
- If the offset is from 0000-7FFF, add 8000 to the offset.
- If the offset is from 8000-FFFF, do not add anything to the offset.
Because SNES is little endian, switch the first two digits with the last two, and you get how they are written to the ROM.
Bank number (needed in 24-bit pointers) = ROM address / 0x8000 + X; (fractional parts of the result are ignored). X is 0 for Fast LoROM, and 80 for Slow LoRom.
Supports games up to 4 megabytes or 32 megabits. An extension called #ExHiROM can be used for ROMs as large as 8 megabytes or 64 megabits. One game which uses HiROM is EarthBound. For pointers to ROM data, just add 0xC00000, but note that headered ROMs have a 512 byte header, so you will also have to subtract 0x200 for those to adjust for the header. So, if we were going to reference the 155,387th byte of the ROM, you would subtract 512 and add 0xC00000, resulting in C25CFB. Finally, a dollar sign is added to the beginning of the pointer to show that it is a SNES pointer: $C25CFB. Remember that will be written to the ROM as FB 5C C2 00, since SNES pointers are little endian.
ExHiROM ROMs won't add C0 for anything past 0x400000, and the last two digits will be those from the linear address rather than C0.
Game Boy Pointers
2 Byte Pointers
Game Boy (and Game Boy Color) pointers are typically two bytes long. They are often contained in the same bank as the data that it is supposed to point to, and is usually directly above or below the data. To calculate a pointer from a Game Boy game:
- Take the offset that you wish to point to.
- Take the last four digits of the offset, and cut off the rest.
- If the offset is outside the range 4000-7FFF, it must be converted like this: (offset mod 4000) + 4000. In other words:
- If the offset is from 0000-3FFF, add 4000 to the offset.
- If the offset is from 4000-7FFF, do not add anything to the offset.
- If the offset is from 8000-BFFF, subtract 4000 from the offset.
- If the offset is from C000-FFFF, subtract 8000 from the offset.
- Because Game Boy is little endian, switch the first two digits with the last two.
- Note: In rare cases, some games, such as Donkey Kong Land 2 and Donkey Kong Land III, may store pointers in big endian, in which case this step is not necessary.
- Take the offset $1201FA
- Take the last four digits: $01FA
- Since $01FA is between 0000-3FFF, you add 4000, so you get $41FA
- Because Game Boy is little endian, you take the 41FA, switch the 41 and FA around to get FA41
3 Byte Pointers
You'll only ever find 3 byte pointers in a GB/C game which has a MBC (Memory Bank Controller), check the ROM header and look at the Pan Docs if it's a game you're unsure about. An MBC is used for accessing more than the default 32K of ROM, by being told to select a bank which the CPU can shove into 0x4000-0x7FFF (RAM).
Sometimes the game programmer might have stored data or code in more than one ROM bank. This might be because they were running out of space in that bank (or at least thought they'd not be able to fit it all in and were utterly wrong). Maybe it's because they wanted to put similar data and/or code into logical groups e.g. putting all of the maps/levels/music from the same general area in the same bank.
Here's how to calculate ROM addresses and bank numbers (you find 2 byte pointers the usual way):
romAddress = (bankNumber * 0x4000) + (twoBytePointer - 0x4000);
bankNumber = (romAddress / 0x4000); /* by the way, ignore any fractional part */
NOTE: When using these formulas, remember to calculate the answer by switching the 2 byte pointers to big endian first, if it hasn't been done for you, like when you view it in a hex editor.
An easy way to calculate addresses or pointer values would be to use a pointer calculator.
Game Boy Advance Pointers
Game Boy Advance Pointers are typically four bytes long, and therefore can point to anywhere in the ROM. Compared to other systems, Game Boy Advance is less complicated when calculating pointers. To calculate a pointer from a Game Boy Advance game:
- Take the offset that you wish to point to
- Add $08000000 to the offset
- For some games, pointers are little endian, so take the four bytes and reverse them. Some other games are big endian, so you do not need to reverse the pointers. Whether a game is big endian or little endian varies from game to game.
Example: You want to point to offset $123456, and the game's pointers are little endian.
- Take the offset $123456
- Add $08000000 to get $08123456
- Since the pointers in this particular game happen to be little endian, you take $08123456 and reverse the bytes to get 56341208